Raveon FireLine Ethernet Bedienungsanleitung PDF herunterladen (Seite 8)

FireLine System Protocol Manual

Raveon Technologies Corp.

5.3. Remote Procedure Request Commands

The following RPR commands are supported. All RPR commands, except the

PING command must be proceeded with the text RPR.

PING

RPR PING xxxx Send a “PING” to modem xxxx where xxxx is 0000 thru FFFE. A

PING is a short request transmitted over the air to another modem

that tells the remote modem to answer back with a short status

packet.

Example: PINGs remote modem 1234.

PING 1234

User enters request to PING station 1234

<REPLY>

FROM=1234

RSSI=-76

</REPLY>

Response back from remote modem 1234

indicates that the RSSI of this modem, as

received by modem 1234 was –76dBm.

RPR ATVR

RPR ATVR xxxx Request the software version of remote modem xxxx where xxxx is

0000 thru FFFE.

Example: Request the software version from modem 1234.

RPR ATVR 1234

User enters request to station 1234

<RPR>

FROM=1234

ATVR=D2

</RPR>

Response back from remote modem

1234 indicates that the modem’s

firmware is verion “D2”.

RPR ATVB

RPR ATVR xxxx Request the DC input voltage of remote modem xxxx where xxxx is

0000 thru FFFE.

Example: Request the software version from modem 1234.

RPR 1234 ATVB

User enters request to station 1234

<RPR>

FROM=1234

ATVB=12520

</RPR>

Response back from remote modem 1234

indicates that the modem’s dc input

voltage is 12525mV (12.520 volts)

RPR ATBD

RPR ATVR xxxx Request the serial port baud rate of remote modem xxxx where xxxx

is 0000 thru FFFE.

1 2 3 4 5 6 7 8 9 10

Kommentare zu diesen Handbüchern

Keine Kommentare

Raveon FireLine Ethernet Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Raveon FireLine Ethernet